How to Recover Data from Crashed SSD Drive? Get the Solution

Published By Ashwani Tiwari

Approved By Aswin Vijayan

Published On May 2nd, 2024

Reading Time 7 Minutes Reading

Category Data recovery

Today technology is so developed that users need to think for a minute before saying NO to anything. For example, even though it seems difficult to recover data from crashed SSD drive as compared to hard drive, it is not impossible. So, in this post, we will explain the technique to recover data from failed, dead or crashed SSD.

Common Reasons for SSD Failure or Crashes

SSDs are not as susceptible to mechanical failure or sudden shock as HDDs, but they can be damaged due to electronic errors or physical damage. Below, we describe the most common reasons why an SSD fails or breaks.

• Improper Drive Usage: Improper usage is one of the most common reasons for SSD damage or failure. If you continue to use the drive when the power fluctuates, suddenly shut down the system, and continue to remove the USB drive without ejecting it safely, your SSD may become stuck or fail logically. You can use a drive monitor to monitor drive health and prevent premature wear on solid-state drives. 
• Overheating: Another reason why SSDs fail is overheating. Solid-state drives often overheat due to intensive operation or heavy workloads. SSDs run about 10°C hotter than HDDs. This device may overheat due to insufficient ventilation or a constant temperature. 
• Firmware Errors: Solid-state drives have complex firmware, which users keep updating to explore new features and improve PC performance. However, SSDs can fail due to interference when trying to update the firmware. 

Additionally, SSD firmware can be corrupted by power surges, causing total failure. In addition to the reasons mentioned above, your SSD may fail or crash due to a malware infection, system file corruption, or physical damage.

Methods to Recover Data from Crashed SSD Drive

Yes, it is possible to retrieve data from failed SSD. While you have the option to perform SSD crash recovery, you should be aware that this can be a complicated process.

SSDs differ from normal hard drives in that their construction is more technically complex.
Therefore, we recommend that you use data recovery software or professional data recovery services to recover data from failed, dead or crashed SSD.

But before you start doing SSD recovery, make sure that the TRIM command is disabled. The success rate of data recovery will depend on this step.

Therefore, if the TRIM command is enabled, the chances of data recovery will be greatly reduced.

Here’s how to check or examine if the TRIM command is enabled:

1. Press Windows Key + X to open the Power User Menu.
2. Select Command Prompt (Admin).
3. Type the following command and press Enter. fsutil behavior query: DisableDeleteNotify
4. If the command returns zero (0), it means the TRIM function is enabled.
5. Conversely, if you get a value of 1, it means that TRIM is disabled.

Additionally, you can increase your chances of successfully recovering data from a failed SSD by following these best practices:

• Disconnect the SSD: After you notice data loss on the SSD, disconnect it from the computer. Connect to another PC to start the data recovery process. Write data to another drive: If you want to recover data through the data recovery tool, make sure not to write to another drive on the computer and not to the same SSD to avoid overwriting the data.
• Use the Right SSD Recovery. It can be a complex and time-sensitive process. Therefore, always try the most suitable data recovery method first to increase the chance of successful data recovery. If none of this works, contact a data recovery service.

Trusted Solution to Recover Data from Crashed SSD Drive

This question is a common query asked by many users. Losing crucial data from the solid-state drives is the worst situation. Does anyone know how it happened with SSD? If not, then don’t worry; I will let you know if an SSD gets crashed due to a virus and malware attack, firmware update failure, segment failure because of corrupted data stored on a solid-state drive, etc. And that lands users in serious data loss situations. Nevertheless, as I said before, you can recover data from failed, dead or crashed SSD simply by using SSD Recovery Software. 

Download Now Purchase Now

This software has the capability to recover data from formatted SSD drive. It also deleted, corrupted, and formatted data from an SSD drive in a few minutes. This is capable enough to restore items from exFAT, FAT, and NTFS partitions of SSD drives in Windows OS. This application is equipped with many algorithms that could strictly scan your complete SSD and extract entire data without leaving even a single bit.

Also, users can install this software on any version of Windows, such as Windows 11, 10, 8, 8.1, 7, and all the below versions. It supports recovering all brands of SSD drives like Sandisk, Toshiba, LG, Sony, Kingston, etc. Supports all file formats, like pdf, excel, doc, Docx, ppt, etc.

Process to Recover Data from Crashed SSD Drive

1: Download and launch the SSD recovery tool on your Windows PC After that, attach the failed or crashed SSD drive

2: After installing the software,. Choose the Restore partitions option from the main screen and select the drive that represents the failed SSD.

3: Now hit Scan for the software to start the scanning procedure.

4: Have a look at the restored files using the Preview option.

5: Save the recovered data at any location on the system.

Summing Up

At the end of this post, we only want to say that it is totally your decision whether you want to waste your precious time executing the manual method. Where there is no guarantee of data integrity and security. OR you want to run an automated tool to recover data from crashed SSD drive. Which is a quick data recovery solution and also guarantees data integrity and security throughout.

FAQ’s